After the asphalt pavement is installed, Site Services can help you put on the finishing touches.
Items such as signage, speedbumps, and wheel stops can help create an organized, useful surface.
Signage
We will furnish and install the proper signs required. The signs can be mounted on walls, posts, precast concrete sign cones or any other method necessary.
Speed Bumps
Preformed Rubber Speed Bump Installation: In the specified exit roadway locations new recycled rubber speed bumps will be installed. Each 6′ section is 11″ wide and 2.5″ high and will be pinned to the pavement. Each speed bump has integral reflectors for higher visibility. The 6′ sections will be staggered to create maximum traffic awareness with a minimum interference with the existing storm water drainage.
Precast Concrete Wheel Stops
We will furnish and install new precast concrete wheel stops. The wheel stops are 7’0″ long, 9″ wide and 7″ high weighing approximately 325 pounds. The wheel stops will be accurately located and pinned to the pavement using 5/8″ diameter steel pins 14″ in length.
Rubber Wheel Stops
We will furnish and install new “recycled” Rubber wheel stops. The wheel stops are 6’0″ long, 6″ wide and 5″ high weighing approximately 55 pounds. The wheel stops will be accurately located and pinned to the pavement using steel pins.
Request A Quote
We provide honest recommendations and clear, detailed estimates for asphalt installation, repair and maintenance.
Thank you for your interest in talking with us. Please complete this form and a member of our team will contact you shortly.
**Please note we do NOT do residential work, we are a commercial contractor.